How To Assign A Description - SEH myUTN utnserver Pro User Manual

USB Deviceserver User Manual Linux
4.1

How to Assign a Description

You can assign freely definable descriptions to the UTN server. This gives you a better overview of the devices in
the network.
You can also assign names to USB ports to distinguish them
1. Start the utnserver Control Center.
2. Select DEVICE – Description.
3. Enter freely definable names for Host name, Description, and Contact person.
4. To confirm, click Save.
 The settings will be saved.
Table 4.1-1: Description
Parameters
Host name
Description
Contact person
Description
Device name as alternative to IP address. With a name you can identify the UTN
server more easily in the network, e.g. if you are using several UTN servers.
Is displayed in the utnserver Control Center and SEH UTN Manager.
Device description, e.g. location or department.
Is displayed in the utnserver Control Center and SEH UTN Manager.
Contact person, e.g. device administrator.
Is displayed in the utnserver Control Center.
31
 34.