How To Request An Occupied Usb Device - SEH myUTN utnserver Pro User Manual

USB Deviceserver User Manual Linux
5.4

How to Request an Occupied USB Device

If a USB device is connected to a client, the connection is of a point-to-point type. As long as the connection is
established, other users cannot connect the USB device to their client and thus cannot use it.
If you want to use an occupied USB device, you can request it. The other user will receive a release request in form
of a pop up. If the user follows your request and releases the USB device by deactivating the connection to the
USB device, the connection between the USB device and your client will automatically be activated.
 The SEH UTN Manager (complete version) is installed on the client  11.
 The SEH UTN Manager (complete version) is installed on the client of the user who uses the USB device  11.
 The SEH UTN Manager (complete version) is executed with graphical user interface on both clients.
 The USB port is shown in the selection list  38.
 The USB port is connected to another client  40 (but not via Auto-Connect).
1. In the selection list, select the port.
2. In the menu bar, select Port – Request.
 The release request will be sent.
42