Administration Using The Utnserver Control Center - SEH myUTN utnserver Pro User Manual

USB Deviceserver User Manual Linux
2.1

Administration using the utnserver Control Center

The UTN server has a user interface, the utnserver Control Center, which can be opened using an Internet
browser.
The UTN server can be configured, monitored and maintained using the utnserver Control Center.
• Opening utnserver Control Center in the Browser  9
• Opening utnserver Control Center from SEH UTN Manager  9
• Controls  10
Opening utnserver Control Center in the Browser
 The UTN server is connected to the network and the power grid.
 The UTN server has a valid IP address  20.
1. Open your browser.
2. Enter the IP address of the UTN server as the URL.
 The utnserver Control Center will be displayed in the browser.
Important:
If the utnserver Control Center is not displayed, check if a gateway is
configured ( 20) and the proxy settings of your browser.
Opening utnserver Control Center from SEH UTN Manager
 The UTN server is connected to the network and the power grid.
 The UTN server has a valid IP address  20.
 The SEH UTN Manager is installed on the client  11.
1. Start the SEH UTN Manager.
2. In the selection list, select the UTN server.
3. In the menu bar, select UTN Server – Configure.
 Your browser opens and the utnserver Control Center is displayed.
9