SEH myUTN utnserver Pro User Manual page 102

USB Deviceserver User Manual Linux
Table 8.3-13: Parameter list – Control Center
Parameters
http_allowed
[Connection]
sessKeys
[Restrict Control Cen-
ter access]
admin_name
[Administrator – User
name]
admin_pwd
[Administrator – Pass-
word]
any_name
[Read-only user – User
name]
Value Default
on/off on
on/off off
max. 64 characters admin
[a–z, A–Z, 0–9]
8–64 characters administrator Defines the password for the administrator user
[a–z, A–Z, 0–9]
max. 64 characters anonymous
[a–z, A–Z, 0–9]
Description
Defines the connection type (HTTP/HTTPS) to
be used for connecting to the utnserver Control
Center Control Center.
on = HTTP/HTTPS
off = HTTPS only
The encryption strength is defined via the
encryption protocol and level  55.
WARNING
Current browsers do not support
low security settings. With them a
connection cannot be established.
Do not use the following combina-
tion: Encryption protocol HTTPS
and encryption level Low.
When the connection is estab-
lished, the identity of the UTN
server is verified. For that, the client asks for the
certificate via the browser ( 66). This certifi-
cate must be accepted by the browser; read the
documentation of your browser software.
Enables/disables the utnserver Control Center
Control Center user accounts. If they are
enabled, a login screen is displayed when open-
ing the utnserver Control Center Control Center.
Important:
Define user accounts (user names
and passwords).
Defines the user name for the administrator
user account.
Important:
Also is the user name of the
SNMPv3 admin account  74.
account.
Important:
Also is the password of the
SNMPv3 admin account  74.
Defines the user name for the read-only user
account.
Important:
Also is the user name of the
SNMPv3 user account  74.
98