SEH myUTN utnserver Pro User Manual page 55

USB Deviceserver User Manual Linux
Command
-h
or
--help
-k USB port key
or
--key USB port key
-mr
or
--machine readable
-nw
or
--no-warnings
-o
or
--output
-p port number
or
--port port number
-q
or
--quiet
-sp port number
or
--ssl-port port number
-t seconds
or
timeout seconds
-v
or
--version
Description
•
state server port number
displays the status of the USB device connected to the USB port.
• getlist server
shows an overview of the USB devices connected to the UTN server
(including port number, vendor ID, product ID, vendor name, product
name, device class, and status).
Shows the help page.
Specifies a USB port key  62.
Important:
The command only enters the key to make the USB device
available.
Use the command
"command string"
the system so that it is sent automatically each time (see
above).
The USB port key configuration is done via the utnserver
Control Center  62.
Separates the output of the command string
and the output of find
Suppresses warning messages.
Shows the output in the command line.
Uses an alternative UTN port.
Use this command if the UTN port number was changed ( 33).
Suppresses the output.
Uses an alternative UTN port with SSL/TLS encryption.
Use this command if the UTN SSL port number was changed ( 33).
Specifies a timeout for the command strings
.
vate
Shows version information about utnm.
51
-c "command string"
to permanently store a USB port key on
getlist
with commas.
activate
or
--command
with tabulators
and
deacti-