USB Deviceserver User Manual Linux
1
Menu bar
2
Buttons for editing the selec-
tion list
3
Buttons for managing the
port connection
4
Selection list
5
Display area for the proper-
ties
Detailed information on how to use the SEH UTN Manager can be found in the
Help' . To start the online help, go to the SEH UTN Manager menu bar and select Help – Online Help.
Important:
Some SEH UTN Manager features might not be displayed or are displayed as inac-
tive. This depends on
• the type and location of the selection list
• the user's rights and the group memberships on the client
• the client operating system
• the settings of the product-specific security mechanisms
• the status of the UTN server and respective USB port
More details can be found in chapter 'SEH UTN Manager – Feature Overview'
106.
Versions
The SEH UTN Manager is available in two versions:
• Complete Version:
SEH UTN Manager with graphical user interface (figure 2.2-1 11) and additional features.
• Minimal version (without graphical user interface):
Usage only via command line ('utnm' 49) .
Important:
The complete version is recommended for general use.
The minimal version is to be used by experts only!
In both versions the 'SEH UTN Service' (Daemon) works in the background and is automatically active after the
system start.
Additionally, the following user groups are distinguished:
• users with administrative rights (administrator)
• users without administrative rights (standard user)
Important:
Some features can only be configured by administrators. More details can be
found in chapter 'SEH UTN Manager – Feature Overview' 106.
Available menu items
Opens the dialog for searching UTN servers in the network and for select-
ing the desired devices 38.
Establishes a connection to the USB device connected to the USB port (
40) or interrupts the connection ( 41).
Shows the selected UTN servers and the connected USB devices.
Shows information on the selected UTN server or USB device 43.
12
'SEH UTN Manager Online
Need help?
Do you have a question about the myUTN utnserver Pro and is the answer not in the manual?