Parameter Lists - SEH myUTN utnserver Pro User Manual

USB Deviceserver User Manual Linux
8.3

Parameter lists

The UTN servers stores its configuration as parameters. You directly use parameters for:
• Administration via email  17
• Configuration backup (viewing, editing and loading parameters onto other devices)  77
The following tables list all parameters and their values so that you can use them in the actions named above.
• Table 8.3-1 'Parameter list – IPv4'  86
• Table 8.3-2 'Parameter list – DNS'  87
• Table 8.3-3 'Parameter list – IPv6'  88
• Table 8.3-4 'Parameter list – Bonjour'  88
• Table 8.3-5 'Parameter list – POP3'  89
• Table 8.3-6 'Parameter list – SMTP'  90
• Table 8.3-7 'Parameter list – IPv4-VLAN'  92
• Table 8.3-8 'Parameter list – Description'  93
• Table 8.3-9 'Parameter list – Date/Time'  94
• Table 8.3-10 'Parameter list – UTN port'  95
• Table 8.3-11 'Parameter list – Notification'  95
• Table 8.3-12 'Parameter list – SSL/TLS'  97
• Table 8.3-13 'Parameter list – Control Center'  98
• Table 8.3-14 'Parameter list – SNMP'  100
• Table 8.3-15 'Parameter list – TCP port access'  101
• Table 8.3-16 'Parameter list – Authentication'  102
• Table 8.3-17 'Parameter list – USB'  103
• Table 8.3-18 'Parameter list – USB device access control'  104
• Table 8.3-19 'Parameter list – Miscellaneous'  105
85