Table of Contents
Advertisement
USB Deviceserver User Manual Linux
6.11 How to Disable a USB Port
By default all USB ports are active. You can deactivate (and re-activate ) the USB port by interrupting or restoring
the power supply.
Deactivate
• unused USB ports to ensure that unwanted USB devices cannot be connected to the network. (Deactivated
USB ports cannot be seen in the SEH UTN Manager.)
• a USB port and re-activate it to restart the connected USB device if it is in an undefinable condition. (The USB
device does not need to be removed and reconnected manually.)
1. Start the utnserver Control Center.
2. Select SECURITY – USB Port.
3. For the desired USB port, enable/disable the option in the column.
4. To confirm, click Save.
The USB port is disabled/enabled.
75
Advertisement
Table of Contents
Need help?
Do you have a question about the myUTN utnserver Pro and is the answer not in the manual?