Dispensing Cappuccinos; Cup Warmer - Astoria Plus4YouTS SAEP Use And Maintenance Manual

6.9 Dispensing cappuccinos

• Put the suction tube in the milk.
• Place the jug under the spout of the
cappuccino maker.
• Open the steam valve and when the
desired amount has been obtained,
close the steam valve.
• Pour the frothed milk into the cups
with the coffee.
To obtain hot non-frothed milk, lift the cappuccino
maker flap upwards.
For better results, we suggest that you do not dis-
pense directly into the coffee cup, but into a jug or pot, and
then pour the frothed milk on top the coffee.
Be sure to constantly keep the cappuccino maker clean, by
following the instructions provided in paragraph "7.7 Clean-
ing operations" on page 60.
User Manual

6.10 Cup warmer

For safety reasons, we do not recommend placing
cloths or other objects on the cup warmer shelf in
order to prevent the machine from overheating.
HIGH TEMPERATURE HAZARD: the cup warmer
can reach temperatures that may cause burns. Be
very careful.
Place the cups to be heated on the cup warmer shelf (1).
To activate the cup warmer, press the button (
When the cup warmer is on, the display will indicate this with
a red heating element.
Cup warmer
ON/OFF
button
To change the temperature of the cup warmer, pro-
ceed as described in para. 6.12.4 on page 54.
Plus4YouTS
1
).
Cup warmer
heating element
on
51 216
of