Mitsubishi Electric 800 Series Manual page 81

5.1.2
Basic operation (factory setting)
Operation mode switchover/Frequency setting
External operation mode
First screen (Output frequency
∗5
Group parameter setting
Hold down

For the details of operation modes, refer to the Instruction Manual (Detailed).

The monitor items can be changed. (Refer to the Instruction Manual (Detailed).)

For the details of the trace function, refer to the Instruction Manual (Detailed).

For the details of fault history, refer to the Instruction Manual (Detailed).

The USB memory mode indication appears while a USB memory device is connected. Refer to the Instruction Manual (Detailed) for the details of the USB memory
mode.
∗1( At power-ON)
PU operation mode
Value change
Second screen
(Output current
*2
monitoring)
Value change
Parameter clear All parameter clear
Automatic parameter setting
(Example)
Blinking
Fault record 1
The last eight fault records can be displayed.
(On the display of the last fault record (fault record 1), a decimal point LED is ON.)
When the fault history is empty,
∗1
Frequency setting written and complete.
*2
monitoring)
The present setting
displayed.
Fault history clear
IPM parameter initialization
∗3
Trace function
(Example)
Blinking
∗4 ∗4
Fault record 2
is displayed.
Operation panel (FR-DU08)
PU Jog operation mode ∗1
Alternating
(Example)
Third screen
∗2
(Output voltage monitoring)
Alternating
(Example)
Parameter write complete.
Parameter copy
Initial value change list
(Example)
Blinking
∗4
Fault record 8
BASIC OPERATION
19