Mitsubishi Electric 800 Series Manual page 65

Application of caution labels
Caution labels are used to ensure safety during use of Mitsubishi Electric
inverters.
Apply the following labels to the inverter if the "retry function" and/or
"automatic restart after instantaneous power failure" have been enabled.
 For the retry function
CAUTION
Retry Function Has
Been Selected
Stay away from the motor and machine.
They will start suddenly (after given
time has elapsed) when alarm occurs.
 For automatic restart after instantaneous power failure
CAUTION
Automatic Restart after
Instantaneous Power
Failure Has Been Selected
Stay away from the motor and machine.
They will start suddenly (after reset
time has elapsed) when
instantaneous power failure occurs.
Application of motor control labels
Apply the following labels to the inverter to avoid connecting motors not
intended for a particular motor control setting.
Induction motor setting
The inverter is set for the induction
motor control.
IM LED is ON during induction motor
control.
Do not drive a PM motor.
PM motor control setting
The inverter is set for the PM motor
control.
PM LED is ON during PM motor control.
Do not drive an induction motor.
General instruction
 For clarity, illustrations in this Instruction Manual may be drawn with
covers or safety guards removed. Ensure all covers and safety guards are
properly installed prior to starting operation. For details on the PM motor,
refer to the Instruction Manual of the PM motor.
3