Troubleshooting - CanyCom Masao CMX1402 Operator's Manual

Troubleshooting

• If any malfunction or abnormal condition is found, immediately stop using the
machine and take an appropriate measure according to the Troubleshooting chart
below. If the malfunction or abnormal condition is not listed in the chart, or the
suggested measure does not solve the problem, consult with your CANYCOM
representative.
• Some corrective measures listed below require special knowledge and/or
equipment. Please contact your CANYCOM representative in such a case.
Area
Engine does not start,
or is difficult to start
Engine
Engine stalls.
Engine stops abruptly.
Troubleshooting
Malfunction
Out of fuel.
Excessive fuel in the
engine.
Battery capacity is
insufficient.
Battery cable is
disconnected.
Insufficient or wrong
oil.
Dirty or damaged spark
plug.
Other (other than the
above).
Out of fuel.
Choke valve closed.
Other (other than the
above).
Out of fuel
Other (other than the
above).
Possible Cause
→Fill fuel.
→Wait a while and try
→Add battery fluid.
→Charge battery.
→Replace battery.
→Connect the battery
→Fill or change oil.
→Clean or replace the
→Follow the
→Fill fuel.
→Open choke valve.
→Please contact
→Fill fuel.
→Please contact
-79-
Corrective Measure
starting again.
cable.
spark plug.
instructions in
"Starting" to restart.
If problem persists,
please contact
your CANYCOM
representative.
your CANYCOM
representative.
your CANYCOM
representative.
6
Ref.
Page 17
Page 71
Page 71
Page 55
Page 58
Page 23
Page 17
Page 17