Driving; Starting - CanyCom Masao CMX1402 Operator's Manual

Ride-on brushcutter
Table of Contents

Advertisement

Driving

Starting

• Always start and run engine in a well ventilated place.
• Always stay on seat when starting engine. Never attempt to start engine away
from machine. Run over accident may result.
• Do not turn main switch to [
motor and/or engine may be damaged.
• Position throttle lever to [
• Do not turn the starter for more than 5 seconds. If the engine does not start,
turn main switch back to [
before attempting to start again.
• If engine does not start after starting procedure is performed several times, turn
off main switch and wait for 5 to 10 minutes and try again.
• Do not use this machine in temperatures above 40ºC or below -15ºC. This
machine cannot perform adequately in these temperature ranges. Using this
machine under such conditions may result in an accident or cause damage to
machine.
• In the winter or cold climate, warm up engine thoroughly before driving
machine. A cold engine delivers poor performance, which may result in an
accident. It also causes excessive wear.
• Do not use this machine in dusty places such as desert. Dust may clog air
cleaner or enter engine, which may reslt in loss of performance and an accident.
It also causes excessive wear.
Operation
(start)] position when engine is running. Starter
(slow)] when starting.
(off)] position and wait for 10 seconds or more
-23-
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Masao cm1401

Table of Contents