Electrical System; Battery - CanyCom Masao CMX1402 Operator's Manual

Lock Nut
Turnbuckle
Lining Groove
5347M-0508-050E

Electrical System

• Always stop engine and remove ignition key when servicing electrical system.
• Shock hazard. Do not handle electrical components with wet hands.

Battery

• Never charge battery when the fluid level is below "lower level" line. Charging
battery with insufficient fluid may shorten battery life or cause an explosion.
• Battery fluid (diluted sulfic acid) is corrosive and causes severe burns. Be
extremeley cautious when handling battery fluid. If battery fluid is spilt on
clothes, immediately rinse with plenty of water. If spilt on skin or in an eye,
immediately rinse with plenty of water and promptly consult a physician.
• Explosion hazard. Keep open flame or spark away from battery. Hydrogen
gas generated during charging is extremely explosive.• Never fill battery fluid
beyond "upper level" line. Battery fluid may spill and cause damage to machine
or injury to person.
Maintenance
5. Move cutting rotary clutch lever to [OFF].
6. Visually inspect if lining is firmly in contact
with lining groove on pulley.
7. Shake turnbuckle to see if there is some play.
8. If lining is not firmly in contact with the
Lining
groove, or turnbuckle is too tight, readjust
turnbuckle.
9. Move cutting rotary clutch lever [ON] and
{OFF] several times, then perform checks 4
through 7. Adjust as necessary.
10. Reinstall upper and lower rear cover.
-71-
5