Appendix A: Condition Codes And Zone Numbers; Introduction; List Of Codes And Zone Numbers - Secutron MR-2200 Programming Manual

4.0 Appendix A: Condition Codes and
Zone Numbers
4.1

Introduction

This appendix lists the condition codes and zone numbers used by the panel.
4.2

List of Codes and Zone Numbers

4.2.1 Condition Codes
The alarm list and archive use the following formats for condition codes.
Archive
A
B
C
D
E
G
H
I
J
M
N
P
S
T
U
W
X
A plus sign (+) refers to a new or on condition, a minus sign (-) refers to a restoral or off
condition, and an equal sign (=) refers to a one time event.
52

Appendix A: Condition Codes and Zone Numbers

Alarm List Description
ALARM Alarm
bypass Bypassed Circuit/Device
com Comlink
dupl Duplicate Addressable Device
alert Maintenance Alert
ground Ground Fault
Hot Key Pressed
ilgl Illegal Addressable Device
Switch
msng Missing Addressable Device
nofire Non-Fire
M.PULL Pull Station Alarm
spv Supervisory
trbl Trouble or Parameter Change
wrong Wrong Device Type
WFLOW Waterflow Alarm
warn Pre-Alert