Panel Window; Figure 8 Panel Window - Secutron MR-2200 Programming Manual

2.6

Panel Window

2.6.1 Overview
The Panel Window (see Figure 8) allows editing of all panel level options. It defines the
hardware mounted in the panel and the functionality of the programmable outputs. The
programming controls provided change to reflect the capabilities of the currently selected
panel. The Title Bar describes the currently highlighted panel or annunciator.
Figure 8 Panel Window
• Exit: Close the Panel Window and return to the System Window.
• Add Panel: Add another panel to the system. A dialog box will be displayed. The default
options are to use the next available panel ID and to select an MR-2100, MR-2200,
MR-2900 panel or MR-2944, MR-2934 annunciator. You will also be asked if you want
MHI to automatically set the Next ID. If allowed, this panel will have the next higher
numbered panel as its Next ID and the panel with the next lower number will be set to
have this panel as its Next ID. If the new panel is the highest numbered panel, it will use
the lowest numbered panel as its Next ID.
• Delete: Remove the current panel from the system. All programming for that panel will
be lost. Any of the panel's outputs that are referenced will become invalid and will be
removed by the next verify.
• Input Circuits: Display the Circuits Window. See section 2.6
• Internal Circuits: Display the Internal Circuit Window. See section 2.7.
• More Info: This displays a dialog box listing basic information about the panel including
the date the database was last downloaded into a panel, the number of times
downloaded, etc.
• Change Type: Displays a dialog box to change the type of the current panel. This makes
it easier to correct mistakes when creating a database and to update the database if a
panel type is changed in the field. Only certain type changes are allowed.
i
Note: This can have far reaching effects on a system. Any information that is no longer
valid with the new panel type will be lost.
Editing MHI Databases
19