2.12 Pushbuttons - Secutron MR-2200 Programming Manual

selected for Fire Alarm type inputs. Use the <space> key or double click on the entry to cycle
between available selections. Use the <Backspace> key in order to quickly reposition the
current selection to another output.
2.11.5 Relays List
The Relays List shows the general purpose function relays of the panel. It is not shown for
annunciators. Each is listed by number and state. The states are *on* for selected, n/a for not
available, and blank for not selected. Use the <space> key or double click on the entry to
cycle between available selections. Use the <Backspace> key in order to quickly re-position
the current selection to another relay.
2.11.6 LEDs List
The LEDs List shows the LED zones available on the panel or annunciator. This is not shown
if the panel has no LEDs. Each is listed by number and state. The states are *on* for selected,
blank for not selected and n/a for not available. Use the <space> key or double click on the
entry to cycle between available selections. Use the <Backspace> key in order to quickly
re-position the current selection to another LED. The actual number of LED zones varies
depending upon the panel or annunciator.
2.11.7 Device List
The Device List shows the addressable devices that can be related to the current point. For
system inputs and groups, it is displayed only if there are any control modules defined for the
panel; for switches, it is displayed if there are any addressable detectors or control modules
defined. Each entry shows the devices's address (panel.circuit.device), its state and its device
message. The states are *on* for selected and blank for not selected. Devices that are not
available are not shown. Use the <space> key or double click on the entry to cycle between
available selections.
2.11.8 Evac
THe EVAC checkbox is an option for fire alarm type inputs only. Checking this option will
cause all bells and strobes to operate in second stage (evacuation) mode.
2.11.9 Msg Receive Check Box
The Msg Receive check box is an option for annunciators with LCDs only. If marked, this
annunciator receives messages about this input point to display in its Alarm List. If not marked,
the annunciator does not receive messages about this input point to display in its Alarm List.

2.12 Pushbuttons

The push buttons, located on the right side of the window, are:
• Exit: Closes the Relate Window and returns to the previous window.
• Map: Displays and/or updates the Map Window. See section 2.8 Map Window of the
Modul-R Human Interface User Guide.
• Verify List: Displays the Verify List. If there is no Verify List, a requester will appear
asking whether you wish to perform a verification. See the Modul-R Human Interface
User Guide for a full description of the Verify List and its uses.
• View Groups: Displays the Groups Window. This is for reviewing the defined groups. No
editing can be done to the groups. To edit the groups, return to the System Window.
Editing MHI Databases
43