Figure 14 Dialer Configuration 1 - Secutron MR-2200 Programming Manual

The first number is the primary number, the second number is for a second monitoring station,
and the third number is the backup number for the first number.
st nd
The 1 and 2 Account Codes identify the system to the central station when a
communication is sent. The code can be programmed for up to four digits. The first and third
telephone number transmit the first account code. The second telephone number transmits
the second account code.
st nd
The 1 and 2 # Format setting affects the type of communication that the dialer sends to the
central station. There are seven formats available including Contact ID, SIA and a pager
format.
The Dialer Settings window has the following push buttons along the right side:
• Exit: Close the Dialer Settings window and return to the IDs window.
• Configuration 1: Display the Dialer Configuration 1 dialog.
• Configuration 2: Display the Dialer Configuration 2 dialog.
• Call Directions: Display the Call Directions dialog.
• Zone Data: Display the Zone Data dialog.
• Maintenance/Common: Display the Dialer Maintenance and Common Reporting
Codes dialog.
2.8.19 Dialer Configuration 1
The Dialer Configuration 1 dialog (see Figure 14) contains the First Communicator Options,
Second Communicator Options and International Options.

Figure 14 Dialer Configuration 1

The Communications option determines if the dialer will communicate to the central station.
When Enabled is selected, the dialer will communicate all events as programmed. When
Disabled is selected, the dialer will not communicate any events.
The TLM One/Two Check options determine whether the dialer will test for telephone line
faults on line one and line two respectively.
The Third Phone # can be programmed for two different modes of operation. When Alternate
Dialing Enabled is selected, the dialer switches between the first and third telephone numbers
after each dialing attempt, until the maximum number of dialing attempts have been made to
each number. When Third Number Backup is enabled, the dialer will use the third telephone
Editing MHI Databases
31