Power Reset Of The Robot Controller - Mitsubishi Electric R56TB Instruction Manual

14.4. Power Reset of the Robot Controller

To make the restored information effective, it is necessary to power on the robot controller again.
If connecting to the CR800-D/CR750-D/CR751-D/CRnD-700 series controller, the power reset of the robot
controller can be performed from the T/B.
If connecting to the CR800-R/CR800-Q/CR750-Q/CR751-Q/CRnQ-700 series controller, please reset the
power by switch of the robot controller.
After restoring, the power reset conformation screen appears. To immediately reset the power, select [Yes].
93