Program List - Mitsubishi Electric R56TB Instruction Manual

13.2. Program list

The lists of the program files are displayed.
For programs in the robot controller, the "Name", "Size", "Date", "Time", as well as the "Protect information", "No. of
lines", "No. of position variables", "Latest cycle time", "Average cycle time", "Operation time", "No. of cycles" and
"Comment" are displayed.
(Note) Program select function of the Program list is available with Ver.2.3 or later of this software.
* As for the program files in the USB memory and in the controller, when even the contents are the same, the
program sizes are different.
Select "USB", and tap on the "Browse" button (<a>) and select folder, and the folder in the USB memory can be
shown.
<a>
81
Release the
selection in the list.
Execute buttons