Register The Password - Mitsubishi Electric R56TB Instruction Manual

16.7.1. Register the Password

The password is registered to the robot controller.
Tap the "Register/Change" button of the item to which register the password in "Password Setup" screen. After
inputting the password in the "Register/Change Password" screen, tap the [OK] button. The input password is
displayed by "*".
Please input the password by 8 characters or more, and 32 characters or less. The character that can be used is
as follows.
Character that can be used by password (8 characters or more, and 32 characters or less)
Number ( from 0 to 9 )
Alphabet (from A to Z, and from a to z)
Caution
Please note the management of the password enough.
It becomes impossible to release the security function of the robot controller when the password is
forgotten. Please note the management of the password enough.
Tabl Character that can be used by password
(Notes)The capital letter and the small letter of the
alphabet are distinguished.
Figure Register Password
142