Force Control Function - Mitsubishi Electric R56TB Instruction Manual

9.12. Force control function

If the force control function is can be used, [F] <a>bottom is displayed in the Jog operation screen.
Tap [F] <a> bottom, [force control screen]<b> is displayed. The force control function is available with Ver.3.0 or
later of this software.
Moreover, the software version of the controller which can use this function is as follows.
Controller S/W Ver. of the controller
CR750-D/CRnD-700 Ver.R3 or later
CR750-Q/CRnQ-700 Ver.S3 or later
CR800-D/R/Q Can be used with all versions
This screen has these functions (" Specification of sense of force control ON/OFF"," Confirmation of present
state"," Monitoring of force control sensor"). Refer to the manual: "Force control" for details on the operation.
<b>
<a>
22