Serial Port Problems; Software Problems - Lenovo 10A4 Hardware Maintenance Manual

Note: Non-IEEE-approved printer signal cables might cause unpredictable problems.
1. Any device drivers and other software that came with the printer are correctly installed.
2. You have assigned the printer port correctly in your operating system, application program, or BIOS
settings. For more information about BIOS settings, see Chapter 5 "Using the Setup Utility program" on
page 55.
If the problem persists, run the tests described in the documentation that comes with your printer. If you
cannot correct the problem, have the computer serviced. See "Lenovo Support Web site" on page 32.

Serial port problems

Use this information to troubleshoot the serial port and devices attached to the serial port.
Symptom: Serial port cannot be accessed.
Actions:
• Ensure that the serial cable is securely connected to the serial port on the computer and to the serial
device. If the serial device has its own power cord, ensure that it is attached to a properly grounded
electrical outlet.
• If the serial device has its own On/Off switch, ensure that it is in the On position.
• If the serial device has an Online switch, ensure that it is in the Online position.
• If the serial device is a printer, ensure that paper is loaded correctly.
• Verify that any software supplied with the serial device is correctly installed. Refer to the documentation
for the serial-device option.
• Ensure that the serial-port adapter, if you added one, is properly installed and firmly seated.
If these actions do not correct the problem, run the Lenovo Solution Center program. If you need technical
assistance, see "Lenovo Support Web site" on page 32.

Software problems

Select your symptom from the following list:
• "When using a sort feature, dates do not sort in the correct order" on page 50
• "Software does not work as expected" on page 50
When using a sort feature, dates do not sort in the correct order
Symptom: When using a sort feature, dates do not sort in the correct order.
Action: Some software developed before the year 2000 used only the last two digits of a year to sort dates,
always assuming the first two digits were 19. Consequently, these programs sort dates out of order. Check
with your software manufacturer to see if any updates are available. Many software manufacturers make
updates available from the World Wide Web.
Software does not work as expected
Symptom: Software does not work as expected.
Actions:
• Most software programs have built-in help systems that provide instructions for most tasks. If you are
having difficulty performing a specific task within a software program, refer to the help system for that
50
ThinkCentre M83 and M93/p Hardware Maintenance Manual