Lenovo 10A4 Hardware Maintenance Manual page 114

Figure 40. Installing the front USB assembly
8. Connect the front USB assembly cable to the front USB connector 2 on the system board. See
"Locating parts on the system board" on page 73.
9. Locate the protective cover for the card reader drive bay on the front bezel. Remove the protective cover
by pressing the small tabs
from the front bezel.
Figure 41. Removing the card reader cover
10. Reinstall the front bezel. See "Removing and reinstalling the front bezel" on page 92.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 150.
106
ThinkCentre M83 and M93/p Hardware Maintenance Manual
1 to the left, and then pulling the tabs to completely disengage the cover