Lenovo 10A4 Hardware Maintenance Manual page 183

Figure 139. Pivoting the drive bay assembly upward
5. Disconnect the signal cable and power cable from the rear of the mSATA solid-state drive storage
converter.
6. Remove the screw that secures the mSATA solid-state drive storage converter. Then, slide the mSATA
solid-state drive storage converter out of the card reader drive bay.
Figure 140. Removing the mSATA solid-state drive from the chassis
7. Remove the two screws that secure the mSATA solid-state drive.
Chapter 9
.
Replacing FRUs (machine types: 10A2, 10A3, 10A8, 10A9, 10AH, 10AJ, 10AM, and 10AN)
175