7. Install the four screws to the new hard disk drive.
Figure 246. Installing the four screws to the hard disk drive
8. Install the new hard disk drive into the adapter as shown. Then, lower the adapter retaining latch until it
snaps into position.
Figure 247. Installing the hard disk drive into the adapter
9. Position the adapter into the adapter bracket and then pivot the adapter downward until it snaps into
position.
.
Chapter 10
Replacing FRUs (machine types: 10A4, 10A5, 10AA, 10AB, 10DF, 10DG, 10DH, 10DJ, 10E8, 10E9, 10EA, and 10EB)
245