Lenovo 10A4 Hardware Maintenance Manual page 181

4. Press the retaining clip
same time.
Figure 135. Pivoting the drive bay assembly upward
5. Take the new mSATA solid-state drive and the storage converter out of its static-protective package.
6. Carefully insert the mSATA solid-state drive into the mini PCI Express slot on the storage converter at an
angle of about 20 degrees. Then, press the mSATA solid-state drive downward.
Figure 136. Installing the mSATA solid-state drive into the storage converter
7. Install the two screws that came with the mSATA solid-state drive to secure the drive to the storage
converter.
Figure 137. Installing the screws to secure the mSATA solid-state drive
Chapter 9
1 in the direction as shown and pivot the drive bay assembly upward at the
.
Replacing FRUs (machine types: 10A2, 10A3, 10A8, 10A9, 10AH, 10AJ, 10AM, and 10AN)
173