Lenovo 10A4 Hardware Maintenance Manual page 237

To install the ac power adapter, connect the ac power adapter to the ac power adapter connector at the rear
of your computer and a workable electrical outlet. Secure the power cord into the power adapter cable loop
at the rear of the computer as shown.
Figure 221. Connecting the ac power adapter
To remove the ac power adapter, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the power cord from the ac power adapter cable loop at the rear of the computer and then
disconnect the ac power adapter cable from the computer.
.
Chapter 10 Replacing FRUs (machine types: 10A4, 10A5, 10AA, 10AB, 10DF, 10DG, 10DH, 10DJ, 10E8, 10E9, 10EA, and 10EB)
229