Lenovo 10A4 Hardware Maintenance Manual page 135

Figure 70. Installing the solid-state drive into the storage converter
2. To install the solid-state drive with the storage converter into the 3.5-inch hard disk drive bracket, flex
the bracket and align pin
storage converter.
Figure 71. Installing the solid-state drive with the storage converter into the hard disk drive bracket
3. Install the solid-state drive into the desired hard disk drive bay. See "Replacing the primary hard disk
drive" on page 122 or "Replacing the secondary hard disk drive" on page 124.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 150.
Chapter 8
1 , pin 2 , pin 3 , and pin
.
Replacing FRUs (machine types: 10A0, 10A1, 10A6, 10A7, 10AG, 10AK, 10AL, and 10BE)
4 on the bracket with the corresponding holes in the
127