Installing Or Removing The Ac Power Adapter Bracket - Lenovo 10A4 Hardware Maintenance Manual

Hide thumbs Also See for 10A4:
Table of Contents

Advertisement

Figure 227. Removing the screws that secure the VESA mount bracket
3. Slide the computer toward the front of the VESA mount bracket to remove the VESA mount bracket from
the computer.
Figure 228. Removing the VESA mount bracket

Installing or removing the ac power adapter bracket

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Safety information" on page 1.
This section provides instructions on how to install or remove the ac power adapter bracket.
Note: The ac power adapter bracket is only available on some models.
To remove the ac power adapter bracket, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Pull the tab
1
and then slide the ac power adapter bracket as shown to remove it from the VESA mount
bracket.
234
ThinkCentre M83 and M93/p Hardware Maintenance Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents