3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 154
4. Press the retaining clip
same time.
Figure 211. Pivoting the drive bay assembly upward
5. Peel off the paper that protects the sticker on the front Wi-Fi antenna.
Figure 212. Peeling off the paper that protects the sticker
6. Stick the front Wi-Fi antenna to the front panel and then insert its cable through the corresponding hole
in the front panel as shown.
Chapter 9
1
in the direction as shown and pivot the drive bay assembly upward at the
.
Replacing FRUs (machine types: 10A2, 10A3, 10A8, 10A9, 10AH, 10AJ, 10AM, and 10AN)
221