Lenovo 10A4 Hardware Maintenance Manual page 131

Figure 64. Removing the primary hard disk drive
6. Flex the sides of the blue bracket to remove the hard disk drive from the bracket.
7. To install a new hard disk drive into the blue bracket, flex the bracket and align pin
pin 4 on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit board
5 on the bottom of the hard disk drive.
Figure 65. Installing the hard disk drive into the bracket
8. Slide the new hard disk drive into the bracket until it snaps into position.
Chapter 8
.
Replacing FRUs (machine types: 10A0, 10A1, 10A6, 10A7, 10AG, 10AK, 10AL, and 10BE)
1 , pin 2 , pin 3 , and
123