Pnp Configuration Setup - FIC VT-502 Manual

VT-502 Mainboard Manual
Selecting OFF allows the BIOS to refrain from waking up the system.
Selecting ON allows the BIOS to wake up the system from Doze mode,
Standby mode, or Suspend mode.
The options are: OFF, ON.
The default of IRQ3, 4, 12 (Wake-Up Event): ON.
The default of IRQ8 (Wake-Up Event): OFF.
Power Down Activities / IRQ3 - IRQ15
Selecting ON will enable the power management timers when a no activity
event is detected in the specified I/O port or component.
Selecting OFF will disable the PM timer even if a no activity event is
detected.
The options are: ON, OFF.
The default value of IRQ3 (COM2), IRQ4 (COM1), IRQ12 (PS/2 Mouse),
IRQ14 (Hard Disk) : ON.
The default setting of other IRQs: OFF.

PNP Configuration Setup

PNP OS Installed
If your operating system is a Plug-and-Play one, such as Windows NT,
Windows 95, select Yes.
The options are: No (Default), Yes.
Resources Controlled By
48