FIC VT-502 Manual page 52

Video Off Method
The option V/H SYNC+Blank allows the BIOS to blank off screen display
by turning off the V-Sync and H-Sync signals sent from add-on VGA card.
DPMS Supported allows the BIOS to blank off screen display by your add-
on VGA card which supports DPMS (Display Power Management Signaling
function). Blank Screen allows the BIOS to blank off screen display by
turning off the red-green-blue signals.
The options are: V/H SYNC+Blank, DPMS (Default), Blank Screen.
MODEM Use IRQ
This feature allows you to select the IRQ# of the system that is the same
IRQ# as the modem use.
The options are: NA (Default), 3, 5, 7, 9, 10, 11.
Doze Mode
When disabled, the system will not enter Doze mode. The specified time
option defines the idle time the system takes before it enters Doze mode.
The options are: Disabled(Default), 1, 2, 4, 6, 8, 10, 20, 30, 40 Min, 1 Hr.
Standby Mode
When disabled, the system will not enter the Standby mode. The specified
time option defines the idle time the system takes before it enters Standby
mode.
The options are: Disabled (Default), 1, 2, 4, 6, 8, 10, 20, 30, 40 Min, 1 Hr.
Suspend Mode
When disabled, the system will not enter Suspend mode. The specified time
option defines the idle time the system takes before it enters Suspend mode.
The options are: Disabled (Default), 1, 2, 4, 6, 8, 10, 20, 30, 40 Min, 1 Hr.
HDD Power Down
Selecting Disable will turn off the hard disk drive (HDD) motor. Selecting 1
Min..15 Min allows you define the HDD idle time before the HDD enters the
Power Saving Mode. The option When Suspend lets the BIOS turn the HDD
motor off when system is in Suspend mode.
The options 1 Min..15 Min and When Suspend will not work concurrently.
When HDD is in the Power Saving Mode, any access to the HDD will wake
the HDD up.
The options are: Disable (Default), 1 Min..15 Min, When Suspend.
IRQ3, 4, 8, 12 (Wake-Up Event)
Award BIOS Setup
47