Table of Contents
Advertisement
PNP/PCI Configuration
PNP OS Installed
If your operating system is a Plug-and-Play one, such as Windows NT,
Windows 95, select Yes. The options are: No (Default), Yes.
Resources Controlled By
If set at Auto, the BIOS arranges all system resources. If there exists
conflict, select Manual. The options are: Auto (Default), Manual. The
manual options of IRQ- / DMA- assigned to are: Legacy ISA, PCI/ISA PnP.
Reset Configuration Data
When enabled, allows the system to clear the last BIOS configuration data
and reset with the default data. The options are: Enabled, Disabled
(Default).
IRQ Sequence
This feature allows you to select the PCI IRQ sequence. The options are: 15,
11, 10, 9, 12, 14, 5, 7, 3, 4; 9, 10, 11, 5, 7, 4, 3, 12, 15, 14 (Default).
CPU to PCI Write Buffer
When enabled, allows data and address access to the internal buffer of the
system controller; so the processor can be released from the waiting state.
The options are: Enabled (Default), Disabled.
BIOS Setup
39
Advertisement
Table of Contents
