FIC VT-502 Manual page 54

If you set at Auto, the BIOS automatically arranges all system resources for
you. If there exists conflict or you are not satisfy with the configuration,
simply set all the resources listed in the above figure by selecting Manual.
The options are: Auto (default), Manual. The manual options of IRQ- /
DMA- assigned to are: Legacy ISA, PCI/ISA PnP.
Reset Configuration Data
When enabled, allows the system to clear the last BIOS configuration data
and reset them with the default BIOS configuration data.
The options are: Enabled, Disabled (default).
PCI IRQ Actived By
We suggest that you set this to its default configuration unless you are a
qualified technician.
The options are: Level (Default), Edge.
Assign IRQ For VGA
If your PCI VGA card does not need an IRQ, select Disabled; therefore, an
IRQ can be released for the system use.
The options are: Enabled, Disabled (Default).
Award BIOS Setup
49