Pnp/Pci Configuration Setup - FIC PA-2010+ Manual

PA-2010+ Mainboard Manual
For instance, if the system connects to a LAN and receives an interruption
from its file server, the system will enter the dreaming mode to execute the
corresponding calling routine. The options are: Primary, Secondary,
Disabled. The default values of IRQ3, 4, 5, 7, 12, 14 are: Primary.
The default value of IRQ8, 9, 10, 11, 15 are: Disabled.
NOTE : Under certain operating system such as Windows NT 4.0 (Build
1381), the CD auto-insertion feature might have some effect on the power
management. It is recommended that the CD-ROM drive to use the
secondary channel, and set the following features in the feature Power
Management Setup. - HDD & FDD : Off ; IRQ15 (Reserved) : Secondary.

PNP/PCI Configuration Setup

PNP
OS
Installed
If your operating system is a Plug-and-Play one, such as Windows NT,
Windows 95, select Yes. The options are: No (Default), Yes.
Resources Controlled By
If set at Auto, the BIOS arranges all system resources. If there exists
conflict, select Manual. The options are: Auto (default), Manual. The manual
options of IRQ- / DMA- assigned to are: Legacy ISA, PCI/ISA PnP.
50