Supervisor/User Password - FIC VT-502 Manual

VT-502 Mainboard Manual

Supervisor/User Password

To enable the Supervisor/User passwords, select the item from the
Standard CMOS Setup. You will be prompted to create your own password.
Type your password up to eight characters and press Enter. You will be
asked to confirm the password. Type the password again and press Enter.
You may also press Esc to abort the selection and not enter a password. To
disable password, press Enter when you are prompted to enter password. A
message appears, confirming the password is disabled.
Under the BIOS Feature Setup, if System is selected under the Security
Option field and the Supervisor Password is enabled, you will be prompted
for the Supervisor Password every time you try to enter the CMOS Setup
Utility. If System is selected and the User Password is enabled, you will be
requested to enter the User Password every time you reboot the system. If
Setup is selected under the Security Option field and the User Password is
enabled, you will be prompted only when you reboot the system.
54