Save And Exit Setup; Exit Without Saving - FIC VT-502 Manual

VT-502 Mainboard Manual

Save and Exit Setup

After you have made changes under Setup, press Esc to return to the main
menu. Move cursor to Save and Exit Setup or press F10 and then press Y to
change the CMOS Setup. If you did not change anything, press Esc again or
move cursor to Exit Without Saving and press Y to retain the Setup settings.
The following message will appear at the center of the screen to allow you
to save data to CMOS and exit the setup utility:
SAVE to CMOS and EXIT (Y/N)?

Exit without Saving

If you select this feature, the following message will appear at the center of
the screen to allow you to exit the setup utility without saving CMOS
modifications:
Quit Without Saving (Y/N)?
NOTE : Default values of the various Setup items on this chapter may not
necessarily be the same ones shown on your screen.
56