Pnp Configuration Setup - FIC VA-502 Manual

VA-502 Mainboard Manual
PNP/PCI Configuration Setup
PNP
OS
Installed
If your operating system is a Plug-and-Play one, such as Windows NT,
Windows 95, select Yes. The options are: No (Default), Yes.
Resources Controlled By
If set at Auto, the BIOS arranges all system resources. If there exists
conflict, select Manual. The options are: Auto (default), Manual. The manual
options of IRQ- / DMA- assigned to are: Legacy ISA, PCI/ISA PnP.
Reset Configuration Data
When enabled, allows the system to clear the last BIOS configuration data and
reset with the default data. The options are: Enabled, Disabled (default).
IRQ Sequence
This feature allows you to select the PCI IRQ sequence.
The options are: 15, 11, 10, 9, 12, 14, 5, 7, 3, 4 (Default); 9, 10, 11, 5, 7, 4,
3, 12, 15, 14.
PCI IRQ Actived By
We suggest that you set this to its default configuration unless you are a
qualified technician. The options are: Level (Default), Edge.
Assign IRQ For VGA
48