VT-502 Mainboard Manual
3). Install the CPU
The CPU module resides in the Zero Insertion Force (ZIF) socket on the
mainboard.
CAUTION :
1.
Always turn the system power off before installing or removing any
device.
2.
Always
observe
Precautions" at the start of |this manual.
3.
Inserting the CPU chip incorrectly may damage the chip.
To install the CPU, do the following:
1. Lift the lever on the side of the CPU socket.
2. Handle the chip by its edges and try not to touch any of the pins.
3.
Place the CPU in the socket. The chip has a notch to correctly orientate
the chip. Align the notch with pin one of the socket. Pin one is located
in the blank triangular area. Do not force the chip.
4. Swing the lever to the down position to lock the CPU in place.
18
static
electricity
precautions.
See
"Handling