Installation Procedures - FIC VT-502 Manual

The VT-502 has several user-adjustable jumpers on the board that allow
you to configure your system to suit your requirements. This chapter
contains information on the various jumper settings on your mainboard.
To set up your computer, you should follow these installation steps:
Step 1 -
Set system jumpers
Step 2 -
Install System RAM modules
Step 3 -
| Install the CPU
Step 4 -
| Install expansion cards
Step 5 -
| Connect cables and power supply
Step 6 -
| |Set up BIOS feature (Please read Chapter Three.)
CAUTION : If you use an electric drill to install this mainboard on your
chassis, please wear a static wrist strap. The recommended electric drill
torque is from 5.0 to 8.0 kg/cm to avoid damaging the chips' pins.

Installation Procedures

Chapter 2
9