Pnp And Pci Setup - FIC PAK-2005 User Manual

PNP and PCI Setup

The "PNP and PCI Setup" option configures the PCI Bus slots. All PCI Bus slots on
the system use INTA#, thus all installed PCI cards must be set to this value.
PNP OS Installed
When Plug and Play operating systems (OS) are installed, interrupts may be
reassigned by the OS when Yes is selected. When a non-Plug and Play OS is
installed or to prevent reassigning of interrupt settings, select No here. The options
are No (Default), Yes.
Resources Controlled By
If set at Auto, BIOS automatically arranges all system resources for you. If there are
conflicts or you are not satisfied with the configuration settings, simply set all the
resources by selecting Manual. The options are Auto (default); Manual.
Reset Configuration Data
When enabled, this feature allows the system to clear the last BIOS configuration
data and reset them with the default BIOS configuration data. The options are
Disabled (default); Enabled.
IRQ Sequence
Allows you to set the sequence of the IRQ#. The options are 9, 10, 11, 5, 7, 4, 3, 12,
15, 14 (default); or 15, 11, 10, 9, 12, 14, 5, 7, 3, 4.
Setting BIOS Feature
63