Only For Installation In An Exposed Drainage Pipe; Installing The Cable Conduit - Kessel Ecolift Instructions For Installation, Operation And Maintenance

3.11

Only for installation in an exposed drainage pipe

- Fit a connection piece <80> between the pump connection
muff <18> and connection piece <22>,
and lock both the red quick-release closures <25>.
3.12

Installing the cable conduit

- Bring the cable conduit (DN70) up to the cable duct <41>
(DN50) on the drain body and fit it.
- For changes of direction use max. 45° bends.
Provide a cable tube for later retrofitting. If this cable tube has to
be installed in the upper section, drill a hole with the KESSEL
hole saw (article number 50101) or a standard Ø 60 mm hole saw
and put in the pipe sealing gasket (article number 850114).
04/2017
Installation
39 / 144
18 80
Fig. [17]
41
Fig. [18]
22
25