Connecting The Venting Pipe (Optional); Preparing The Connection Of The Pressure Pipe - Kessel Ecolift Instructions For Installation, Operation And Maintenance

3.9

Connecting the venting pipe (optional)

The venting pipe (optional) must be routed in such a way that it
does not hinder access for maintenance purposes nor the other
pipe connections (pressure pipe / cable conduit pipe).
- Screw the venting valve <11> out of the pump unit
<20>.
- Fix the vent pipe to the connection <12> on the venting valve
and route it through the drain body above the sealing
level.
3.10

Preparing the connection of the pressure pipe

- Remove the sealing plug <21> on the drain body <1>.
- Insert sealing gasket <24>
- Fit the connecting piece <22> from the inside of the tank on
the extension section <1> and tighten the nut <23>
using approx. 10 Nm.
- Connect the on-site pressure pipe to the connecting piece.
Installation
38 / 144
Fig. [15]
24
1 22
Fig. [16]
11
20
12
21
23
04/2017