Table of Contents
Advertisement
Top side view of the fixture:
3.3 Securing the Fixture
Regardless of the mounting method of the X4 ATOM PSU 12 you'll have to
use a stipulated safety wire.
Attach the safety wire through the attachment point shown below and
connect it to the primary support structure.
Pay attention to a safe and proper fastening. The safety cable must comply
with BGI 810-3 (EN 60598-2-17 Section 17.6.6) and be capable of bearing a
static suspended load that is ten times the weight of the fixture and all
installed accessories.
X4 Atom PSU12 manual (v1.0)
2 x camlock
1 x M10 x 11mm
thread bolt
2 x safety attachment point
from software version: v1.21
GLP German Light Products
6
Advertisement
Table of Contents
