Safety Instructions - GLP X4 atom PSU 12 Instruction Manual

2 Safety Instructions

1. Before powering on the fixture, make sure that the fixtures fans and air
inlets are clean and not blocked.
2. The fixture doesn't contain any user serviceable parts. Opening the
fixture will void all warranties.
3. It is necessary to wait at least 15 minutes after disconnecting the mains
power before handling the fixture. Pay attention to possible hot parts
of the fixture.
4. To ensure safe operation, follow also the Installation guide described
in the chapter below. Operating the X4 ATOM PSU 12 without suitable
safety aids like Safety cables or clamps/hooks can increase the risk of
an accident and must be avoided.
5. Repair, maintenance, and installation work shall be done by qualified
or GLP certified staff only. You need to pay attention to the common
rules of technology that are not explicitly mentioned in this manual.
6. Use only original GLP spare parts. Any structural modification of the
system will terminate all warranty claims.
7. Please keep this instruction manual for future reference.
8. Should you have any questions about the operation of your fixture
then please contact your local GLP office, or their authorized
distributor, a list of which can be found at www.glp.de.
X4 Atom PSU12 manual (v1.0)
The X4 ATOM PSU 12 is a High-Tech Product.
To guarantee a smooth operation, it is necessary to respect
the following rules. The manufacturer of this device will not
take responsibility for damages through any disregard of the
information provided in this manual. Warranty claims also
will be voided in the case that the fixture housing is opened.
Never look directly into the beam of light or into the LED.
Attention: LED Class 2M can cause injuries of your eyes even
without optical instruments in front of them or within a
distance of less than 0.5m and short exposure time.
Hence: Avoid direct radiation into your eyes!
from software version: v1.21
GLP German Light Products
4