ADTRAN 604 System Manual page 134

Section 4 User Interface Guide
UDP P T
ORT YPE
The choices are
S
TANDARD
when set: DHCP, TFTP, DNS, NTP (Network Time Protocol, port 123), NBNS (NetBios Name
Server, port 137), NBDG (NetBIOS Datagram, port 138), and BootP. When
UDP port (1 to 65535) can be specified in the UDP Port columns (up to three per server).
UDP P 1, 2, 3
ORT
Used for specifying UDP ports to be relayed. These fields only apply when
. Default is 0.
S
PECIFIED
R > S
OUTER TATUS
View the ,
IP R IP S
OUTES
R > S > IP R
OUTER TATUS
This lists the contents of the unit's IP route table.
R > S > IP R
OUTER TATUS
Network or host destination address.
R > S > IP R
OUTER TATUS
Network mask applied to the destination address.
R > S > IP R
OUTER TATUS
Host or router to receive this packet.
R > S > IP R
OUTER TATUS
Port gateway is located on:
LOCAL
0
ETH
0
WAN
0 . . . 9
FR FR
R > S > IP R
OUTER TATUS
Number of times the unit has referenced the route.
132
(def) and
S
PECIFIED
, ,
ARP C DHCP S
TATS ACHE
OUTES
> IP A
OUTES DDRESS
> N
OUTES ETMASK
> G
OUTES ATEWAY
> P
OUTES ORT
Sent directly to the unit's router
The unit's Ethernet port
The unit's first PPP bundle
The unit is connected up to 10 DLCIs
> U
OUTES SE
© 2004 ADTRAN, Inc.
Total Access 600 Series System Manual
. The following standard UDP protocols are relayed
, and
DHCP C
ERVER LIENT
is set, the
S
PECIFIED
is set to
UDP P T
ORT YPE
statistics from this menu.
61200624L1-1B