ADTRAN 604 System Manual page 71

Total Access 600 Series System Manual
S U > T
YSTEM TILITY
Specifies the IP address of the remote system to trace the routes to.
S U > T
YSTEM TILITY
Specifies the maximum number of router exchanges allowed when traveling to the final destination
(specified using the
T
RACE
S U > T
YSTEM TILITY
Specifies the maximum delay (in seconds) given to a host (along a path to the final destination) to respond
to the probe datagram sent before considering the packet a failure.
S U > T
YSTEM TILITY
Specifies the number of times the probe datagram is sent to each host (along the path to the final
destination).
S U > T
YSTEM TILITY
Activates the traceroute process.
S U > R
YSTEM TILITY
Selecting this activator will initiate a soft reset of the unit.
S U > T
YSTEM TILITY
Selecting the terminal mode gives the user a command-line prompt to perform utilities such as pings,
traceroutes, resets, firmware updates, configuration, and more.
using the shortcut keys <Ctrl+T> from other menu screens. From this command-line prompt, you can:
• Perform a reset with the command "reset"
• Perform a complete factory restore with the command "factory_reset"
• Configure the unit. The unit has the ability to download a text file which contains the configuration of
the entire unit. This configuration may then be altered in a text editor, and then uploaded to a unit. (See
DLP-13, Saving and Loading Text Configuration using Terminal Command Line, for further
assistance.)
• Debug and troubleshoot. This function would be carried out with the assistance of ADTRAN Technical
Support.
• Start and stop the fail-safe timer for the auto-config feature.
• Perform a firmware upgrade via TFTP.
upgrade_firmware hostname filename
• Use the save command to write the entire configuration to flash.
• Display the unit's MAC address with the command mac.
• Perform a ping or extended ping. Syntax is:
ping hostname/address [repeat xx] [size xx] [timeout xx] [source xx] [noNat]
61200624L1-1B
> T
RACEROUTE RACE
> M
RACEROUTE AXIMUM
field) Range is
T
ARGET
> T
RACEROUTE IMEOUT
> R
RACEROUTE ETRIES
> B
RACEROUTE EGIN
U
ESET NIT
M
ERMINAL ODE
© 2004 ADTRAN, Inc.
T
ARGET
H
OPS
to . Default is
1 30 30
( )
IN SECS
T
RACEROUTE
T
ERMINAL
Section 4 User Interface Guide
.
can also be accessed by
M
ODE
69