L2 Protocol (Tdm Firmware) - T1 Interface > Auto Protocol - ADTRAN 604 System Manual

Total Access 600 Series System Manual
L2 P (TDM F
ROTOCOL
View the status of the T1 interface with the
L2 P (TDM–T1–A
ROTOCOL
View the status of the auto detect function and traffic flow for the T1 interface with an
.
A
UTO
L2 P (TDM–T1–A
ROTOCOL
This field represents the state of the auto detect/configuration function. The possible state are:
O
FF
D L2
ETECTING
P
ROTOCOL
C FR
ONFIRMING
C FR
ONFIRMED
C PPP
ONFIRMING
C PPP
ONFIRMED
L2 P (TDM–T1–A
ROTOCOL
Number of packets transmitted out of the WAN port.
L2 P (TDM–T1–A
ROTOCOL
Number of packets received on WAN port.
L2 P (TDM–T1–A
ROTOCOL
Number of bytes transmitted out of the WAN port.
L2 P (TDM–T1–A
ROTOCOL
Number of bytes received out of the WAN port.
L2 P (TDM–T1–A
ROTOCOL
Clears all the gathered statistics for this interface and returns the counters to 0.
61200624L1-1B
) – T1 I
IRMWARE NTERFACE
L2 P
ROTOCOL
) > S
UTO TATUS
) > S > S
UTO TATUS
The T1 interface is down, so the auto-detect/configuration process is
currently idle.
The T1 interface is up and waiting for the first control/signaling packet.
The T1 interface is up and one FR signaling packet has been received
The T1 interface is up and two FR signaling packets have been received.
It takes two consecutive control/signaling packets of the same type to
confirm the detected protocol.
The T1 interface is up and one PPP control packet has been received.
The T1 interface is up and two PPP control packets have been received. It
takes two consecutive control/signaling packets of the same type to
confirm the detected protocol.
) > S > T
UTO TATUS
) > S > R
UTO TATUS
) > S > T
UTO TATUS
) > S > R
UTO TATUS
) > S > C
UTO TATUS
© 2004 ADTRAN, Inc.
Section 4 User Interface Guide
> A
UTO
set to (using Auto-config feature).
A
UTO
TATE
P
X KTS
P
X KTS
B
X YTES
B
X YTES
S
LEAR TATS
P
ROTOCOL
set to
L2 P
ROTOCOL
99